Checkline FGS-220VC - Manual (Page 8)

- 3 -
5 MODE key Change operation modes or function settings.
6 SET key The indicated data is set when the key is pushed.
7 START key Start the program mode operation
8 PUSH key Move in the PUSH direction.
9 STOP key Stop operation.
10 PULL key Move in the PULL direction.
11 ZERO key
Clear distance in Manu and Jog modes.
Clear repeat time in Sing, Cont and Prog modes.
12 LCD display Displays distance, speed and mode, etc.
LCD display
4. Setup
4.1. Installation of force gauge
Force gauge that can be connected with FGS-VC is FGV series.
Force gauges up to 100kgf are compatible with the FGS-220VC.
Force gauges up to 200kgf are compatible with the FGS-550VC.
In case of FGS-220VC
The force gauge is fixed to the stand.
The force gauge is set in the mounting plate.
Remove the mounting plate using the
hex-head spanner accessory.
Set the force gauge in the mounting plate.
Fix the mounting plate with the force
gauge to the stand using supplied bolts.
Main display
Sub display
Status display