Checkline FGS-100PV - Manual (Page 3)

3
Inspection/Standard Accessories
If any shipping damage is detected upon receiving the test stand, please do not unpack the unit.
Notify your shipping carrier immediately for damage claim instructions.
Refer to the nameplate located on the back of the test stand to confi rm model number ordered,
record serial number for future reference.
1.0 Features and Benefi ts
Shimpo’s FGS-100PVH (standard speed) and FGS-100PVL (low speed) Programmable Motorized
Test Stand offers:
All steel construction which guarantees durability and stability for production, laboratory
andquality control applications.
Programmable FORCE and Distance (length) limits.
Dual speed controls are optimally positioned to adjust test and return travel rates of the drive
assembly.
Drive assembly accepts a universal mounting plate, enabling the interfacing of a large
selection of force gauge models (contact Shimpo for specifi c models).
4½ digital LED display indicates displacement rate and distance of the drive assembly.
Analog output (10mV/mm) is convenient for data acquisition requirements.(used with)
FGS-ANALOG cable.
(3 ) M5 x 6 screws
(1) 5mm Allen wrench
(4) M4 x 8 screws
(1) Force gauge to Test Stand Interface cable (FGV-FGS250P)
(1) Analog output cable (FGS-ANALOG)
Manual
Warranty Card
MODEL SPEED
FGS-100PVL 0.19 - 4.72 inch/min (5.00 - 120 mm/min)
FGS-100PVH 0.79 – 19.69 inch/min (20-500 mm/min)