Checkline DT-361 - Manual (Page 6)

6
Indication of low battery voltage 2.3.2
If the remaining battery power drops to near zero, the number display alternates between the
process setting and LLLLLL. However, operation can be performed even when the battery is in this
low condition.
If the remaining battery decreases further, the number display indicates only LLLLLL, which then
stops operation. Press the power switch and shut off the power immediately.
In either case, charge the unit according to the procedure in 2.3.1 Charging method .
•Indication of low battery voltage
Indicates alternately
•Indication of stopped operation
Battery replacement 2.3.3
If the fully charged battery continually decreases, please replace it with the specified replacement
battery. Please contact your local dealer for details.
1. Remove 4 screws located on the bottom of DT-365 and take out the battery assembly.
2. Remove the screws on the connector and the battery supporter and replace with the new
battery.
3. Fix the new battery with the screws and connect the connector.
4. Install the new battery assembly to DT-365.
Connector
Battery
Fix with the hole facing the front.