Cannon Instrument D155 Density Meter - Manual (Page 47)

44
7. Others
7-1. Basic specifications
Type and Model D155 Density Meter
Discipline Oscillating Glass U-tube
Measuring Range 0 to 2g/cm 3
Measuring Temperature Range 15 to 25℃
Precision Density ±0.001g/cm 3
Temperature ±0.1℃
Repeatability Density SD 0.0005g/cm 3
Resolution Density 0.0001g/cm 3 step
Temperature 0.05℃ step (Setting Resolution: 0.1℃ step)
Specific Gravity 0.0001 step
Temperature
Compensated
Parameter
0.0001 step
API Degree 0.1 step
Measurement Time 2 to 4 min
Viscosity Correction None
Display 1) Screen: 4×20 LCD backlight
2) Displayed Parameter:
Temperature (℃)/ Density/ Specific Gravity
Number of temperature compensation tables for petroleum products
Temperature Compensated Parameter (60℉Specific Gravity/ 15℃ Density/
20℃Density)/ API Degree/ Other messages
Sampling Method Manual sampling by syringe
(optional peristaltic pump for automatic sampling)
Min. required Sample Amount Syringe: Approx. 1mL, Pump: 8mL
Maximum Sample Viscosity Approximately 1000 mPa⋅s when using optional peristaltic pump
Calibration Pure Water (factory/service calibration of air)
Storage of Measurement Result Last 10 measurement results stored in internal memory
Temperature Compensation
Table for Petroleum Products
ASTM D1250 Table 23(A,B,D), 53(A,B,D), 59(A,B,D)
Interface RS-232C×1ch, USB×1ch
Ambient Conditions for unit 1) Temperature: 5 to 35℃
2) Humidity: Below 85％RH (No condensation)
Power Source AC100～240V 50/60Hz
Power Consumption Approx. 30W
Dimension 251mm (W) × 408mm (D) × 165mm (H) [10” x 16” x 6.5”)
Weight 11.6kg (25.64 lbs)
Standard Supplied Accessory
- Connection Tube: Qty 1
- Syringe 2ml: Qty 5
- AC Power Cord: Qty 1
- Wrench: Qty 1
- Tube 0.5x1.5 L=400 PTFE: Qty 1
Optional Accessories
- Dot matrix printer
- Peristaltic pump
- Soft-Cap Data Capture Software
CANNON ® D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA