Cannon Instrument D155 Density Meter - Manual (Page 12)

9
2-2. Installation and start-up
2-2-1. Power cable
1) Make sure the power switch is in the OFF position.
2) Plug in the supplied power cable on the back of unit.
3) Connect the power cable to the power outlet.
< 3-pin plug >
The 3 pins plug has an earth terminal and
grounds to the AC Mains earth.
Warning!
The earth wire must be grounded. If not, there exists a danger of electric
shock.
CANNON ® D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA