Cannon Instrument D155 Density Meter - Manual (Page 16)

13
2-3-2. Key functions (General description)
Here is a brief description of function of each key:
[][][][] key : Key to select menu options, settings, or enter numeric values.
[MEAS] key : Key to start density measurement.
[PUMP] key : Key to turn or off the optional peristaltic sampling pump. This key can be
used during both calibration and measurement.
[STOP] key : Key to abort density measurement or calibration and also escape or return
back to standby mode (the main display screen) or previous menu selection.
[ENTER] key : Key to confirm the menu selection or numeric data entry.
[MENU] key : Key to select the menu selection screen. Pressing this key and then the
Up/Down arrow keys will cycle through the following menu options:
Menu:0 Calibrate Cell Calibrate with pure water standard
Menu:1 View Stored Results Display measurement results
Menu:2 Set Sampling time Select sampling time (amount of time the peristaltic pump runs)
Menu:3 Select Oil-Table Select API temperature compensation table for oil
Menu:4 Set Test Temperature Set measurement temperature
Menu:5 Set Date & Time Select date and time for measurements
Menu:6 Set LCD Contrast Adjust brightness of display screen
Menu:7 Reset Test Number Reset Sample test number to “01”
Menu:8 Clear Stored Results Clear the memory of stored measurement results
Menu:9 Export Stored Data to USB Drive Export data to external USB storage device (MS-Excel format)
Menu:10 View Serial No. & Firmware Ver. Check instrument serial number and firmware version
CANNON ® D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA