BUCHI Multivapo P-12 - Manual (Page 57)

7 Maintenance
57 Multivapor™ Operation Manual, Version E
7 .3 .4 Cleaning the vacuum cover and replacing the corresponding O-rings
NOTICE
Risk of component damage.
• Close the screws at the vacuum cover hand-tight.
• Avoid overtightening.
Clean the vacuum cover regularly by rinsing it
with water or ethanol through the holes of the
conical adapters.
Unmount the cover only in case of severe con-
tamination. Use the optional PE frits to protect
the cover from any possible splashes (see also
chapter 4.6).
Fig. 7.41: Cleaning the vacuum cover
7 .4 Crystal rack
ᕢ
ᕡ
ᕣ
ᕤ
Fig. 7.42: Removing the crystal rack for cleaning