BUCHI Multivapo P-12 - Manual (Page 18)

3 Technical data
18 Multivapor™ Operation Manual, Version E
Order number:
MP x x 1 x x x x x Protective shield
Product Order number
Protective shield P-6, P-12 48784
Order number:
MP x x x x x x Evaporation unit, tube adapter, glassware
Product
01: Configuration with evaporation unit (i.e. crystal rack
and vacuum cover), set of tube adapters for BUCHI’s
standard sample tubes, preparation/transfer rack,
set of BUCHI’s standard sample tubes (
ø 60 mm for
P-6, ø 25 mm for P-12).
99: Configuration with evaporation unit but without
tube adapters and glassware. The corresponding
adapters have to be ordered separately according
to the Multivapor Adapter Guide.
00: Configuration without evaporation unit, without
preparation/transfer rack and without adapters and
glassware. This is the recommended choice to set
up a PEEK system instead of a PETP system. The
corresponding items have to be ordered separately
as accessory (not via the ordering matrix).