BUCHI Rotavapo R-215 - Manual (Page 65)

10 Spare parts
65 R-210/215 Operation Manual, Version F
Table 10-5: Glass assemblies CR
Product Order number Product Order number
Glass assembly CR complete with 1 l
receiving flask (without reflux insert 48080) 40670 Stop cocks SJ 18.8/38 40627
Cold trap CR outer part
(including tube clips GL-14 complete) 11228 Stop cocks SJ 18.8/38 40628
Cold trap CR complete (00672 + 40628
+ 11228 + 27462 + 27479 + tube clip
GL-14 complete) 11511 Distribution head
(including 23900 + 23875) 40657
Glass assembly CR P+G complete with 1 l
coated receiving flask (without reflux insert
48080) 40672 Distribution head P+G (including 23875
+ 23900 40658
Cold trap CR outer part P+G
(including tube clip GL-14 complete) 25614 Clip for receiving flask S35 03275
Cold trap CR complete P+G (00672 +
40628 + 25614 + 27462 + 27479 + tube
clip GL-14 complete) 33478 Gasket WD 26/seal 48021
Cold trap inner part 00672 Support rod complete (optional) 48180
Cap for cold trap 27479 Vapor duct SJ 29/32 with Combi Clip 48160
Screw cap GL-10 23875 PTFE tube 300 mm 00646
FPM O ring 3×2.7 mm 23900 Reflux insert, complete 48080
Seal PTFE/Viton complete 27462 Set of tube clips straight GL-14,
4 pieces, 4 x olive straight with screw
caps 37642
PTFE tube, 600 mm 28096 Set of tube clips GL-14, 4 x bent, 2 x
straight, 6 x screw caps 38000
Tube clips GL-14, bent, complete, set of 4 37287 Cross sleeve 27344
PTFE disk (drain disk) 40625 Rubber band 32013
Shut-off valve 40626