BUCHI Rotavapo R-215 - Manual (Page 23)

3 Technical data
23 R-210/215 Operation Manual, Version F
3 .3 Technical data overview
Table 3-5: Technical data
R-210 Rotavapor
without display
R-215 Rotavapor with
display
B-491 Heating bath B-495 Heating bath
Glass assemblies A, V, C, S, E, CR, BY
Dimensions ( W x H x D) 550Ч575Ч415 mm 285Ч240Ч300 mm 310Ч230Ч320 mm
Weight 16–18 kg (depending on the glass
assembly) 4 kg 5 kg
Connection voltage 100–240 V ±10 % 100–120 V or 220–240 V ±10 %
Mains connection 3-pole (P, N, E) via power cord 3-pole (P, N, E) via power cord
Frequency 50/60 Hz 50/60 Hz
Heating power 1300 W
Power consumption max. 60 W max. 1700 W
Installation category II II
Degree of protection IP21 IP21
Pollution degree 2 2
Rotation speed range 20–280 rpm
Flask size 50–4000 mL up to 4000 mL up to 5000 mL
Max. flask content 3 kg
Temperature control
range 20 °C–180 °C 20 °C–95 °C
Display Rotation speed/
vapor temperature Set/
actual temperature
Temperature accuracy ± 2 °C ± 3 °C
Environmental conditions
Temperature
Altitude
Humidity for indoor use only
5–40 °C
up to 2000 m
maximum relative humidity 80 % for temperatures up to 31 °C, and then linearly
decreasing to 50 % at 40 °C
Bath content 4 l 5 l
Vacuum tightness of
system with 1 l evapo-
rating and 1 l receiving
flask 5 mbar per 3 minutes at a pressure of
<10 mbar
Temperature resistance
P+G ca. –70 °C–60 °C
Temperature resistance
P+G low temperature –80 °C–50 °C
Temperature resistance
protective shield < 160 °C