Brookfield DV-III Rheometer - Manual (Page 4)

- 4 -
Component Part Number
Spindle Set with Case depends on model
LVDV-III set of four spindles or SSL
RVDV-III set of seven spindles or SSR
HA/HBDV-III set of seven spindles SSH
For Cone/Plate versions: a spindle wrench, one cone spindle and sample cup Part No.
CP-44Y replace the spindle set.
Power Cord depends on model
for 115 VAC DVP-65
for 230 VAC DVP-66
RTD Temperature Probe DVP-94Y
Ribbon Cable DVP-32
Guard Leg:
LVDV-III B-20Y
RVDV-III B-21Y
Carrying Case DVP-71Y
Operator Manual M/91-210
Please check to be sure that you have received all components, and that there is no
damage. If you are missing any parts, please notify Brookfield Engineering or your local
Brookfield agent immediately. Any shipping damage must be reported to the carrier.
I.2 Utilities
Autosensing Power Supply:
Input Voltage: 85 - 265 VAC
Input Frequency: 47 - 440 Hz
Power Consumption: Less than 20 Watts
Power Cord Color Code:
United States Outside United States
Hot (live) Black Brown
Neutral White Blue
Ground (earth) Green Green/Yellow
I.3 Specifications
Speed Range: 0-250 RPM, 0.1 RPM increments
Viscosity Accuracy:
±
1.0% of full scale range for a specific spindle running at a
specific speed.
Temperature sensing range: - 100
°
C to 300
°
C (-148
°
F to 572
°
F)
Temperature accuracy:
±
1.0
°
C from -100
°
C to 150
°
C
±
2.0
°
C from +150
°
C to 300
°
C
Analog Torque Output: 0 - 1 Volt DC (0 - 100% torque)
Analog Temperature Output: 0 - 4 Volts DC (10mv /
°
C)