Casio XJ XJ-360 - Manual (Page 24)

User Maintenance
E-24
8.
Secure the lamp cartridge with the three screws.
9.
Return the lamp cover to its original position, and secure it with the screw.
z After replacing the lamp, be sure to perform the procedure under “Resetting the Lamp
Time”.
4. Loosen the lamp cover screw, and then
remove the lamp cover. 5. Loosen the three screws securing the
lamp cartridge.
6. Use the lamp cartridge handle to pull
the lamp cartridge from the projector.
z Bracing your thumb on the projector as
shown in the illustration, slowly lift the
cartridge handle and pull the cartridge
out of the projector.
7. Insert the new lamp cartridge as far as
it will go, as shown in the illustration.
z After inserting the lamp cartridge, lay its
handle down in the position shown in the
illustration under step 5 on this page.
Lamp cover
Lamp cartridge
Screws
z Never touch the lamp with your hand.
Doing so can cause the lamp to rupture
and shorten its life.