Aviom 6416Y2 - Manual (Page 77)

67 s
PecIfIcatIons
s
PeciFicatioNs
Channels Up to 16 digital inputs and 16 outputs simultaneously
Interface Format Yamaha mini‑YGDAI (MY) Expansion Card;
Supports 8‑ and 16‑channel modes (MY8 and MY16)
Sample Rate 1x: 44.1, 48kHz
2x: 88.2–96kHz
The Pro64 176.4/192kHz sample
rates are not supported.
24‑bit resolution
Sample Rate Ranges 1x: 39.7–52kHz;
2x: 79.4–104kHz;
Maximum Ambient
Temperature
50°C
Virtual Data Cables RS‑232/RS‑422
DB9 connector; DIP switch configuration
Control data from backplane may also be routed to VDCs; DIP switch
configuration
(Backplane VDC is not supported on all Yamaha digital devices.)
A-Net 2 EtherCon RJ45 connectors
A-Net Cable Length 400 feet (120 meters) between Pro64 devices
Latency <420µs (measured from Yamaha backplane to AES3 output, through the
network)
Generated Clock
Jitter/Wander
1.8ns peak at Clock Master; 50ns peak at a Pro64 device 70 serial
connections from the Clock Master (relative to the Clock Master’s
reference).
Jitter/Wander Spectrum Flat above 600Hz; increases 6dB/octave below 600Hz (inaudible due
to masking). At the 70th serial connection, increased wander is due to
inaudible spectral components below 60Hz.
Power Supply +3.3V, +5V, +15V supplied by the Yamaha host device
Dimensions 4.75”w x 6.25”d x 1.5”h
(120.7 x 158.8 x 38.1 mm)
Weight 0.8 pound (0.36 kg)
All Aviom products are designed and manufactured in the USA.