Aviom AN-16/i v.2 - Manual (Page 53)

Specifications
Audio Inputs 16, balanced line-level
TRS Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
TRS Thru Tip: Audio +; Ring: Audio -; Sleeve: Ground
A/D Conversion 48kHz, 24-bit
Input Level /
Gain Settings
+22dBu, +4dBu, 0dBu, -10dBV
4-position gain switch, per channel pair
Metering
Two LEDs per channel;
green: Signal Present, red: Clip;
Stereo Operation
Stereo link, per channel pair;
Two-position switch (Mono, Stereo)
Maximum Input Level +22dBu
Input Impedance 17.8k ohms
Frequency Response 4Hz-22kHz +0.2dB/-3dB
THD +N < 0.003%
Crosstalk -90dB
Signal to Noise
(unweighted)
90dB typical, A/D to D/A;
Measured from AN-16/i v.2 to AN-16/o Output Module
Bit Error Rate (BER) 10 -12
Digital Output 1 A-Net Out; RJ45 connector
Digital Input 1 A-Net In; RJ45 connector
A-Net Pro16e Slots
4-position Slot Range switch assigns the A-Net output to
occupy Slots 1-16, 17-32, 33-48, or 49-64
A-Net Uses unshielded Cat-5e UTP (or better) cable
A-Net Cable Length 400 feet (122 m)
Latency <0.880 msec (measured from analog input to analog output)
Power Supply
Input Voltage
Output Voltage
Plug Size
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Dimensions
19” (482.6 mm) wide x 5.75” (146 mm) deep;
1U high
Weight 6.8 lb. (3.08 kg)
Options
AN-16SBR System Bridge; used to combine up to four A-Net
streams for transmission over one Cat-5e cable
All Aviom products are designed and manufactured in the USA.
45 AN-16/ i v .2 i Nput M odule u ser G uide