Aviom AN-16/i v.2 - Manual (Page 48)

40 AN-16/ i v .2 i Nput M odule u ser G uide
Digital Snake - 16 x 16
To configure a 16 x 16 (16 Sends, 16 Returns) digital snake, two AN-16/i v.2 Input Modules and two AN-16/o
Output Modules are used, connected via the System Bridge.
Setup On Stage
Place the following on stage:
one AN-16/i v.2 Input Module •
one • AN-16/o Output Module
one AN-16SBR •
Make these connections:
Set the 1. Slot Range switch on the AN-16/i v.2 Input Module to 1-16.
Connect the 2. A-N
et
O
ut
of the AN-16/i v.2 to port A on the System Bridge.
Connect the 3. A-N
et
I
N
of the AN-16/o Output Module to port D on the System Bridge.
A B C D
PRO16
PORTS
Cat-5 connections on stage for the 16 x16 digital snake are shown.