Canon EOS ELAN7NE-33V User Manual
Page 87
87
C.Fn-08 Partial metering linkage with AF point/FE lock
Partial metering and FE lock can be linked to the selected AF point.
Effective for composing the shot.
0 : Disabled (Partial metering/FE lock linked to center AF point)
1 : Enabled
C.Fn-09 Flash sync speed in Av mode
0 : Auto
1 : 1/125 sec. (fixed)
When you use flash in the aperture-priority mode (Av), the flash
sync speed will be fixed at 1/125 sec. This prevents the camera
from setting a slow sync speed in low-light conditions.
C.Fn-10 Superimposed display for focus confirmation
0 : On
1 : Off
Disables the AF point from flashing in red when it achieves focus.
When the AF point is selected, it will still flash in red.
C.Fn-11 AF point selection method
0 : <3> button + <h>
1 : Select AF point manually with <h> or select automatically
with <3>
While the metering is active (0), you can manually select the AF
point with the
AF point often or if you want to change the AF point in the AI
SERVO AF mode.
2 : <3> button + <l> <u>
After you press the <3> button, turn the
select the AF point. Turn the
point or turn the dial to select a vertical AF point.