Canon EOS ELAN7NE-33V - Manual (Page 76)

76
KWireless Remote Control
Using the Remote Switch
With Remote Controller RC-1 (sold separately), wireless operation is
possible up to 5 m/16.4 ft away from the front of the camera.
1 Turn the film advance mode lever
to <p>.
s The icon appears on the LCD
panel.
Connect the Remote Switch RS-
60E3’s (sold separately) plug to the
camera’s remote control terminal. To
take a picture, press the Remote
Switch’s shutter-release button.
2 Take the picture.
• Point the signal transmitter toward
the camera’s remote control sensor
and press the signal button.
s The remote control lamp will light,
and the picture will be taken.
• For details on using the remote
control, see the RC-1’s instructions.
Remote control
sensor
Certain types of fluorescent light may cause camera misoperation. During
wireless remote control, try to keep the camera away from fluorescent light.
• You can also use Remote Controller RC-5 (sold separately).
• If you set the film advance mode lever to
and do nothing for four
minutes, the wireless remote control mode will be canceled automatically to
save battery power.