beautypg.com

Direct access, For normal and/or timer recordings), To calculate the index number – Panasonic OMNIVISION PV-8451 User Manual

Page 24: Vms index search system

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

T^peOgeratioiHcontinu^

^Important: If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does not

work when pressed, press the VCR button on the remote and try the button again.

VMS Index Search System

Each time you start a recording, an invisible index mark is placed on the tape. When timer recordings are

made, program index and program information (see “Time Stamp Feature" on page 21) are also included.
You can then use these index marks to access or scan your recordings.

Direct Access

(For normal and/or timer recordings)

This feature allows you to go directly to the recording you want from
anywhere on the tape by entering the appropriate index number.

_____ /1

ll\ _

----- \ lli^—-

REWIND

FAST FORWARD

4

4

SELECT SEARCH MODE

PROGRAM INDEX SEARCH

SELECT;* ▼ KEY
SET :► KEY
END ;INDEX KEY

1

Press INDEX*

to display the

“SELECT SEARCH MODE” screen.

• This screen appears only if there are timer

recordings on the Program Index list. If this
screen does not appear, go to step 3.

2

Press

AT

to select “INDEX

SEARCH,”

and then press ►

to display the “INDEX” screen.

Press a NUMBERED key

to

select the desired recording.

• To calculate the number, see below.

Press REW or FF

to start a reverse

or fonward search.

• When the designated location is reached,

the VCR goes into Playback mode.

To calculate the Index Number

Count fonvard or backward each recording starting point, including

the recording you want to see, from wherever you are on the tape.

Example 1:

If you are watching recording 4 and you want to watch recording 2, count the
start points to number 2. The total is 3. Enter 3 in step “3" and press REW.

t

1

^

^

4

5

{

6 7

Example 2:

If you are watching recording 2 and you want to watch recording 6, count

the start points to number 6. The total is 4. Enter 4 in step “3" and press FF.

I

I

I

^

1

I

■ Ts- ^

6

7

NOTE: i indicatesstartpointsof each recording.

24

Make each entry within 10 seconds, or the Index Search mode will be canceled.

Index marks will be placed for Timer recordings as well.
If any of №re VMS Index Search System are initiated extremely close to an index mark, the index mark may

not be counted in the search.

In the Program Index Search mode, this VCR can memorize a total of 8 programs in order of recording.
If you memorize rrwre than 8 programs, the first program will be deleted and the new program will be listed.