Panasonic OMNIVISION PV-8451 - Manual (Page 21)

I^^Check list before you begin.
□ Clock is set to correct time.
2
3
b
C
NOTE
When the VCR is
connected to a
Combination VCR
which has a Btue Back feature,
even if the VCR Blue Back is set
to “OFP on the VCR, the screen
will go to a blue background.
Time Stamp Feature
For about the first 10 seconds of each recording, the VCR automatically writes
the following program data on the tape; Date, Start time, Scheduled stop time
{for Timer Rec. only), Channel No. and Category (for Timer Rec. only). Then,
if playback is started at the starting point of the recording, this information will
be displayed about 7 seconds after playback begins for a few seconds.
1 Press ACTION to display the menu.
2
Press AT
to select “SET UP
FEATURE,” and then press ► to
display the “SET UP FEATURE” screen.
3
Press ► to select “ON” or “OFF."
• When “OFP is selected, the program data is
written on the tape, but will not be displayed
for the first 5 seconds of playback.
SET UP VCR
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
lOIOMA/ LANGUE: ENGLISH
SELECT;* ▼ KEY
SET :► KEY
END :ACTION KEY
------- SET UP FEATURE --------------
: OFF
SET :► KEY
ENO : ACT I ON KEY
Press ACTION twice to exit.
Normal/
One Touch Recording Timer Recording When Clock is not set.
12/28/1998 MON
12:00PM
CH 08 ABC
12/28/1998 MON
12:00PM -
1:00PM
CH 08 ABC SPOFTTS
If the tape speed is changed immediately after recording begins,
the display may be incorrect.
Blue Back ON/OFF Feature
You may choose whether or not you want the VCR to display a solid blue
screen when the broadcast signal is very weak or nonexistent.
3 Press ACTION to display the menu.
b
Press
AT
to select “SET UP
VCR,” and then press ► to
display the “SET UP VCR” screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
Id IOUA/ LANGUE: ENGL I SH
SELECT:* Y KEY
SET ;► KEY
END lACTION KEY
------------SET UP VCR-------------------
REPEAT PLAY
SELECT:* ▼ KEY
SET :► KEY
END :ACT I ON KEY
Press AT
to select “NOISY CH
BLUE BACK,” and then press ►
to select “ON” or “OFF.”
• When “ON" is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFP is selected, the picture
is displayed regardless of the signal condition.
• The picture can not always be seen clearly when “OFP is selected.
Press ACTION twice to exit.
ON
ON
ON
21