Panasonic OMNIVISION PV-8451 - Manual (Page 19)

STOP
______ il J----------------------------- 1
Lisa
POWER Multi Function Display
Cancel a Timer Recording:
{Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress) ................... set program
1 Press PROG to display the “SET
PROGRAM” screen.
2 Press AT to select “TIMER
PROGRAM," and then press ► to
display all currently set programs.
3 Press AT and ► to select and
set a program number.
{See page 18.)
4 Press AT and to select
and set replacement timer
information.
5 Press PROG twice to exit this mode.
VCR Plus.. PROGRAM
P DT START STOP CH SPD
II--------:-------------- __ __
2 a 1O;O0P12:OOP125 SP
3 10 8:00P 9:00P 10 SP
4 SU 9:OOP10:OOP L LP
SELECT 1-8:* t KEY
ENTER :»■ KEY
END : PROG I^Y
BILTK I / START STOP
8 SAT 1O:0O?12:O0P 12
T®SAt\
CATEGORY; SPORTS
ABC
SP
SELECT:* Y KEY
SET :4 ► KEY
END :PR0G KEY
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to display the “SET
PROGRAM” screen.
2 Press AT to select “TIMER
PROGRAM,” and then press ► to
display all currently set programs.
3 Press
AT
to select a program
number.
4 Press ADD/DLT if you want
to clear the program.
5 Press PROG to exit this mode.
SET PROGRAM
VCR Phn+ PROGR
lllS|i|ililfr!«lïHM
P DT START STOP CH SPI
2 B 10:CX>P12:OOP125 SP
3 10 B;OOP 9:00P 10 SP
4 SU 9:OOP10:OOP L LP
CANCEL:ADD/DLT KEY
SELECT 1-8:* T KEY
ENTER :► KEY
END :PR0Q KEY
P DT START STOP CH SPD
□------------:----------- - - -
2 8 10:00P12:00P125 SP
3 10 0:OOP 9:00P 10 SP
4 SU 9:00P10:00P L LP
SELECT 1-8;* Y KEY
ENTER :► KEY
END :PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to move the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction.
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and press REW, (release REW first, and
then release STOP/EJECT) to exit this mode.
6 Insert a cassette with record tab and press POWER off to set the timer.
19