Panasonic OMNIVISION PV-8451 - Manual (Page 13)

[case 1 1/ 4/2000 TUE 12:OOPH
DSTiON
SETTING : CH 02
AUTO CLOCK SET
COMPLETED
MD : PUSH CH UP KEY
If the displayed time is correct, press CH A to exit.
• This concludes one time VCR setup.
• See important note at the bottom of this page.
If the displayed time and DST. are not correct...
If you happen to live close to two time zones, the VCR
may have recognized the PBS channel (setting channel)
in the wrong time zone. Please do the following to
correct the situation.
a Make a note of the SETTING:CH number shown on­
screen and press CH A to exit.
b Delete the setting channel from the VCR channel
memory. (See “To Add or Delete a Channel"
section on page 14.)
c Press ACTION to display the menu.
d Press AW to select “SET CLOCK,” and then
press ► to display the “SET CLOCK” screen.
e Press AW to select “AUTO CLOCK SET," and then
press ► to display the “CLOCK AUTO SET screen.
f Press CH A to start Clock Auto Set.
• If you use a cable box and have multiple PBS
stations, tune the cable box to a different PBS
station and try auto clock set using the menu.
ACTION
SELECT/SET
(AT^^)
keys
CHANNEL UP
[Case 2)
AUTO CLOCK SET
ts
INCOMPLETE
PUSH ACTION TO SET CLOCK
If the screen CASE2 appears "AUTO CLOCK SET
IS INCOMPLETE” PI 2, auto clock set is not
available in your area. Please set the clock
manually as described below.
— SET CLOCK *-------------
1/-/--------
mmimm
SELECT:* » KEY
SET :► KEY
END
: ACTI ON KEY
a Press ACTION to display the
SET CLOCK screen.
b Press AT and ► to
select and set the month,
date, year, time, and
DST. (Daylight Saving Time).
To Make Corrections,
repeatedly press ► to move the cursor
to the incorrect entry and make the correction.
c Press ACTION twice to start
the clock and exit this mode.
CCT CLOCK ———
1/ 4/2000 TUE 12:
uaMAHJiiiaiaH
SET :* ► KEY
START :ACTION KEY
IMPORTANT NOTE FOR AUTO
CLOCK SET WHEN USING
CABLE BOX OR DSS RECEIVER
• Auto clock set will be performed when
the VCR is turned off the first time each
day. If you use a cable box and you
want auto clock set to be performed, the
cable box must be left on and tuned to
the PBS channel before the VCR power
is turned off.
• If you use a DSS receiver, it must be
turned off for auto clock set.
• If you use AudioA/ideo Jack connection
between the VCR and Cable Box or
DSS receiver, you must also connect
the RF coaxial cable in order to use the
auto clock set and channel auto set
features.
13