Panasonic UF-250 - Manual (Page 75)

PROBLEM SOLVING
INFORMATION CODES
When something unusual occurs, the display may show one of the information
codes below. These will help you identify the problem, if any.
Information
code
Meaning Response
010 No recording paper. See page 66.
030
Document is not set
properly. Reset the document
correctly.
031
Document is jammed or
document length exceeds
one meter.
Open the transmitting guide
unit and remove the
document. Then reset the
document (see page 68).
061
Receiver Cover Unit and
Bottom Board Unit opened
during communication.
Close the Receiver Cover
Unit and Bottom Board Unit.
400 to 599 Communication trouble
due to:
• varying telephone line
conditions
• fax machine incompatibility
• problem at other party.
• Reset the docurtient and try
again.
• Check the other party
621
Unable to dial and poll
because of no recording
paper.
See page 66.
623 No document was on the
ADF when transmission
started after automatic
dialing operation.
Place documents face down
on the ADF.
630 Redialing was not
successful because of a
busy line or no response.
Redial manually.
638 Power failure occurred. Try the same operation
again.
74