Panasonic UF-250 - Manual (Page 61)

PRINTOUT REPORTS AND LISTS
Journal Printout Explanation
( 1 )
(2)
(3)
(5)
( 6 )
(7)
Printout date
Printout time
Communication number
(4) Communication result
; Day-Month-Year
: HounMinute
: 1 ~ 32 (Does not always begin with 1
when printed out manually.)
: OK indicates the transmission was
successful.
S-OK : indicates that STOP was pressed
during communication,
Three-digit information code (see page 74)
appears when there was a problem.
Number of pages transmitted or received.
The two digit number is the number of pages successfully transmitted or
received. When the Total Page function is activated, two 2-digit numbers
will appear. The first 2-digit number represents the number ;of pages
successfully transmitted. The second 2-digit number represents the total
number of pages that were attempted to be transmitted.
An asterisk * indicates that the quality of some received copies was poor.
Duration of communication
Type of communication
(8) Remote station identification
(9) Communication date
(10) Communication start time
(11) Diagnostic
(12) LOGO
(13) ID number
(14) Dialing method
(15) Call back message
Hours:Minutes’Seconds
XMT = Transmission
RCV = Reception
A name indicates station name recorded
in this machine. A number indicates
remote station’s ID number or Telephone
number. Group 2, 3 indicates that the
remote station was a CCITT G2, G3
machine.
Day-Month
Hour.Minute
For Panasonic service personnel only.
Up to 25 characters.
Up to 20 digits
“T” indicates direct dialing or
One-Touch/Abbreviated dialing with no
recorded station name.
Appears when voice contact was
requested.
60