Transmission, Verification stamp, Transmission verification stamp – Panasonic UF-250 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
TRANSMISSION
Verification Stamp
Your facsimile machine is normally preset to stamp the bottom of each page
you send with a small pink mark indicating that the page was successfully
transmitted. Although this mark will not show up in copies or facsimiles (if you
decide to send the same document again), you may not want to have this mark
on some of your documents. To set the Verification Stamp OFF,
1
STAMP
0 1 - J A N - 1 9 8 8 1 5 : 0 0
STAMP=ON
STAMP
0 1 - J A N - 1 9 8 8 1 5 : 0 0
STAMP=OFF
To return to STAMP = ON, press [STAMP again.
You can now dial by pressing TEL/DIAL and a full number,
a One-Touch key,
I
ABBR
I
and two digits, or
I
REDIAL
NOT€
After changing the Stamp setting, you can
1. return to standby with | STOP |, or,
-__________ .
2. start a different series of settings by pressing 1 RESOLUTION I, j ORIGINAL
I HALF TONE I . MODE РП ПП. or ПНЖСТЮМ
3. To change the preset Stamp position, see page 26.
32