Fax parameters, Setting fax parameters – Panasonic UF-250 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
SETTING UP YOUR MACHINE
FAX PARAMETERS
Your facsimile machine has a variety of adjustable FAX parameters. These
parameters, listed in the Parameter Table, are normally preset for you and do
not need to be changed. If you do decide to change anything, read the table
carefully.
Some parameters, such as the Resolution, Contrast, and Verification Stamp
parameters, can be temporarily changed by simple key operations just before a
transmission is made. When the transmission ends, however, these parameters
return to their preset values. Other parameters can only be changed by the
procedure described below.
Setting FAX Parameters
and
, or
MODE
CZZIOZ)
or
repeatedly.
Enter a fax parameter number (always
2 digits) from the Parameter Table
(see page 28).
Ex; |i]|T]for RESOLUTION.
(Note: The bracketed number is a
factory preset value which you
may ignore.)
Enter different setting number.
Ex: [
2
] changes Resolution to FINE.
26
FAX PARAMETER
N 0 . 0 1 [ 1 I
FAX PARAMETER
N 0 . 0 1 [ 1 ] = i