For non-deferred programs – Panasonic UF-250 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

For Non-Deferred Programs:

To erase the program key, press I CLEAR in step 4 (page 23) and then

press START

To erase some of the stations, use MODE | - | and | +1 to find the

station you want, then press CLEAR

To add new stations, use One-Touch keys or ABBR and two digits.

To change stations, erase and add new numbers as explained above.

After step (6f), (6g) or (6h) is completed, press START .

To change the program name, press START

repeatedly until

PROGRAM NAME is displayed, then write over the name and press

START

NOT€

n steps (6e), (6f), (6g), (6h) and (6i) above, you can return to standby by pressing
STOP . But, be sure to press | START | to store the new settings before pressing

STOP