When 2nd abbr. no. is set, When 2nd abbr. no. is not set, Transmission – Panasonic UF-250 User Manual

Page 42

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TRANSMISSION

When 2nd ABBR. NO. is set,

If the number is busy, the machine will

automatically dial the 2nd ABBR. NO.
which you have already recorded

(Ex: 111 I). (See page 18.)

If the 2nd number is also busy, the machine

will wait three minutes and then automatically

redial the 1st number and 2nd number each
2 times in the same way.

* D I A L I N G *

[ 1 1 1 ( S t a t i o n n a m e )

W A I T I N G T O D I A L

[ 0 7 ] ( S t a t i o n n a m e )

When 2nd ABBR. NO. is not set,

if the number is busy, the machine will

wait three minutes and then

automatically redial the same number.

If the line is still busy, the machine

will wait and redial one more time

automatically.

If no contact is made, the display will
show an information code (e.g.,

CODE = 630 Indicates the line was

busy).

W A I T I N G T O D I A L

[ 0 7 1 ( S t a t i o n n a m e )

INCOMPLETE

I N F O . CODE=630

NOT€

To redial a busy number, see page 43.