Error correction mode (ecm) – Panasonic UF-250 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Error Correction Mode (ECM)

You can transmit documents free of errors by setting ECM to ON. In case
transmission speed is more important than reproduction quality of documents

being sent, you may set ECM to OFF. To set ECM to OFF,

0 1 - J A N - 1 9 8 8 1 5 : 0 0

ECM=ON

repeatedly.

0 1 - J A N - 1 9 8 8 , 1 5 : 0 0

ECMiOFF

To return to ECM=sON, press SELECT again.

You can now dial by pressing TEL/DIAL|and a full number,

a One-Touch key. I ABBWI and two digits, or fREblAlT

NOT€

After changing the ECM setting, you can

1. return to standby with | STOP |, or,

2. start a different series of settings by pressing

STAMP

HALF TONE

RESOLUTION

MODE L3H . or ¡FUNCTION

ORIGINAL

3. To change the preset ECM position, see page 26.