Panasonic GP-US532H - Manual (Page 9)

CONNECTIONS
Cautions :
1. Keep the DC POWER ON/OFF switch in the OFF
position until all connections have been properly
made.
2. Connect the camera head and camera control unit.
Internal Sync Operation
1. Connect the camera cable between the camera
head and the camera control unit,
2,. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video monitor or VCR,
Video
Monitor
VTR or
Video Monitor
Coaxial
Cable
VIDEO
7St¡ 1 gHhZ
VIDEO
75tJ[B | h I-Z
© ©
IN OUT
© ©
IN OUT
ecu
a
X VDfO i
A
3. Connect the power cable between the DC 12 V
input terminals and the 12 V DC power supply unit
(obtained locally),
• Calculation method of maximum cable length
between camera control unit and power supply unit
is as follows,
11.5 V DC < V a - (R
X
0.42
X
L) < 16 VDC
L : Cable length (meter)
R : Resistance of copper wire (ii/meter)
V a : DC output voltage of power supply unit
L standard = V a - 12 / 0.42 x R (meter)
L minimum ^ V a -16 / 0.42 x R (meter)
L maximum ^ V a - 11.5 / 0.42 x R (meter)
2
.
Gen-lock Operation
1. Connect the camera cable between the camera
head and the camera control unit.
Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video input connector of
Special Effects Generator (SEG), and between the
VBS/HD input connector of the camera control unit.
ecu
Connect the power cable between the DC 12 V
input terminals and the 12V DC power supply unit
(obtained locally).
Cautions :
1. Connect to 12 V DC (11,5 V - 16 V) class 2
power supply only.
2. To prevent fire or electric shock hazard, use a
UL listed wire VW-1, Style 1007 cable for 12 V
DC input terminals.
Cautions:
1. Connect to 12 V DC (11.5 V - 16 V) class 2
power supply only.
2. To prevent fire or electric shock hazard, use a
UL listed wire VW-1, Style 1007 cable for 12 V
DC input terminals.
-
7
-