2. agc detection control area setting (agc cont), Electronic shutter speed setting (shutter), Gain control setting (gain) – Panasonic GP-US532H User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3-2. AGC detection control area setting (AGC CONT)
1. Select OFF for the ELC ON/OFF selector on the
front panel of the camera control unit. Then confirm
the ELC parameter is OFF.
ELC
1. Move the cursor to the SFIUTTER parameter.
2. Select the shutter speed or MANU for manual set
ting from the following.
•MANU — OFF (1/60) —1/100 —1/250
l
:
□
1/500
1/1000
•1/2000—1/4000
1/10000
D
3. When you select MANU, press the PAGE button.
The SHUTTER menu appears and the MANU SET
parameter starts blinking.
2. Move the cursor to the ELC parameter and press
the PAGE button.
The AGC CONT menu appears.
3.
** AGC CONT **
AREA
CALLI
PEAK/AVE
P....I.
RET END
Follow the same step 3 of “3-1. ELC detection con
trol area setting (ELC CONT)" to select the desired
detection area (AREA).
Follow the same steps 1 and 2 of “3-1-2. Peak and
Average Weight Control (PEAK/AVE)’’ to set the
detection value.
** SET UP **
CAMERA ID
FLD/FRH
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
*OFF
FLD
*OFF
r*MANU
AUTO
INT
ABC
*SCENE1
Blinking
Select the desired electronic shutter speed by
► . The adjustable range is 1/525-261/525 lines.
or
4. Electronic Shutter Speed Setting
(SHUTTER)
Note: When ON is selected for ELC on the SET UP
menu, this item is not available. To select the
electronic shutter speed, select OFF for ELC
on the SET UP menu.
You can select the electronic shutter speed of 1/100,
1/250, 1/500, 1/1 000, 1/2 000, 1/4 000 or 1/10 000 sec
onds. Also manual setting is available.
** SET UP **
CAMERA ZD
FLD/FRM
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
•OFF
FLD
•OFF
[OFF
AUTO
INT
ABC
•SCENE1
5. Gain Control Setting (GAIN)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (AUTO) or
manual level adjustment (MANU).
** SET UP **
CAMERA ID
•OFF
FLD/FRM
FLD
ELC
•OFF
SHUTTER
OFF
GAIN
fAUTO
SYNC
INT
BLACK BAL
ABC
SCENE FILE
•SCENEl
END
Move the cursor to the GAIN parameter.
Select AUTO or MANU. The gain of the video
amplifier is changed according to the position of
the
automatic/manual
gain
selector
(HIGH/LOW/OFF) on the front panel of the camera
control unit.
-
14
-