Panasonic GP-US532H - Manual (Page 20)

2. Press the PAGE button. The BLACK BAL menu
(manual black balance setting menu) appears.
2. Press the PAGE button. The SCENE FILE menu
appears.
** SCENE FILE 1 ** PI
GAMMA ETTTTiTTTO
AUTO KNEE ON
TOTAL-PED -__ I..-
CHROMA GAIN -_______ I_+
DTL BAND - .1.+
HDTL GAIN - ....I.... +
VDTL GAIN -_______ I_+
RED DTL OFF
NEXT RET END
3. Move the cursor to R-PED. The cursor starts blink­
ing,
4. Attach the lens cap on the camera lens'.
5. While observing the vector scope or waveform
monitor, adjust the red pedestal level (R-PED) by
^ or ► for minimum carrier.
6. Move the cursor to B-PED. The cursor starts blink­
ing.
7. While observing the vector scope or waveform
monitor, adjust the blue pedestal level (B-PED) by
or ► for minimum carrier.
Note: To reset the pedestal level to the factory set­
ting, move the cursor to R-PED or B-PED and
press the M and ► button simultaneously for a
second or more. The R-PED or B-PED level
value reset to the factory setting.
8. Scene File Setting (SCENE FILE)
This menu allows for you to adjust and set 17 items
for the video signal of camera to meet your
requirment.
There are two scene files so that two settings are
memorizable.
Switch the SCENE FILE 1 and the SCENE FILE 2 by
the scene file selector on the front panel of the
camera control unit.
1. Move the cursor to the SCENE FILE parameter and
select SCENE!
** SCENE FILE 1 ** P2
CLEAN DNR [OFF
2D LPF OFF
MATRIX R-G
MATRIX R-B -___ I____
MATRIX G-R -___ I, . . .
MATRIX G-B -___ I____
MATRIX B-R -___ I. . . .
MATRIX B-G - . . . .1-
HUE -___ I____
NEXT RET END
** SET UP **
CAMERA ID ♦OFF
FLD/FRM FLD
ELC ♦OFF
SHUTTER OFF
GAIN AUTO
SYNC INT
BLACK BAL ABC
SCENE FILE [♦SCENEl
END
>
There are 2 pages for SCENE FILE (PI and P2),
On page 1 (PI), you can set the following items:
• Gamma Correction (GAMMA)
• Auto Knee ON/OFF (AUTO KNEE)
• Total Pedestal Level Control (TOTAL-PED)
• Chrominance Level Control (CHROMA GAIN)
• Detail Band Control (DTL BAND)
• Horizontal Detail Gain Control (HDTL GAIN)
• Vertical Detail Gain Control (VDTL GAIN)
On page 2 (P2), you can set the following items:
• Red Detail ON/OFF (RED DTL)
• Clear Digital Noise Reduction Control (CLEAN
DNR)
• 2 Dimention Low Pass Filter (2D LPF)
• 6 Chroma Matrix Controls
(MATRIX R-G)
(MATRIX R-B)
(MATRIX G-R)
(MATRIX G-B)
(MATRIX B-R)
(MATRIX B-G)
• Chroma Phase Control (HUE)
To turn the page
Move the cursor to NEXT and press the PAGE button.
To return to the SET UP menu
Move the cursor to RET and press the PAGE button.
-
18
-