Panasonic GP-US532H - Manual (Page 14)

1. Move the cursor to the FLM/FRM parameter.
2. Select FLM (field) or FRM (frame).
Note:
When FRM is selected, ELC is set to OFF auto­
matically.
3. Electronic Light Control Setting
(ELC)
The electronic light control function eliminates inter­
ference by strong background lighting which
makes the camera picture dark, such as a spot­
light. In the ELC mode, more photometric weight is
given to the desired point of the screen (to where
the important object is located).
3. Move the cursor to the AREA parameter and select
the desired detection area. You can select the
desired detection area from followings.
ALL: All areas on the monitor screen are detected,
MANU: Detection areas are selectable manually.
See below for details,
CENTER: The photometric weight is given to the
center of the monitor screen.
S CIRCLE (Small Circle): The photometric weight
is given to the areas in the small circle of the
monitor screen.
M CIRCLE (Medium Circle): The photometric weight
is given to the areas in the medium circle of the
monitor screen.
L CIRCLE (Large Circle): The photometric weight
is given to the areas in the large circle of the
monitor screen.
** SET UP **
CAMERA ID *OFP
FLD/FRM FLD
ELC t'ONl
SHUTTER OFF
GAIN AUTO
SYNC INT
BLACK BAL ABC
SCENE FILE ♦SCENEl
EHD
3-1. ELC detection control area setting (ELC CONT)
1, Select ON for the ELC ON/OFF selector on the front
panel of the camera control unit. Then confirm the
ELC parameter is ON.
2. Move the cursor to the ELC parameter and press
the PAGE button.
The ELC CONT menu appears.
** ELC СОИТ **
AREA ;ALL
PEAK/AVE P--------1.
RET EHD
Each time you press
changes as follows.
or ►, the parameter
ALL—► MANU —► CENTER —* S CIRCLE (Small Circle)
u
M CIRCLE (Medium Circle) L CIRCLE (Large Circle)
ALL Detection Area
/
ПППППППП
ПППППППП
ШПППППП
□□□□□□□□
ПППППППП
.ПППППППП
CENTER Detection Area
П □ /
V \~ --
■■nnrirjg
■■□ПППИ
—
□ □
i □ □
— 50% Sensing
Area
—100% Sensing
Area
S CIRCLE Detection Area
/
!
/
■ Ш
■ ■ ■ Ш
■ ■
>
-
12
-