Panasonic GP-US532H - Manual (Page 19)

8. Supply the video output signal of the camera to be
adjusted and the reference gen-lock input signal to
a dual-trace oscilloscope,
9. Set the oscilloscope to the horizontal rate and
expand the horizontal sync portion on the oscillo­
scope.
10. Adjust the horizontal phase by pressing or ►.
The adjustable range is 0-1.5 ps.
6-4. External HD/VD Mode (HDA^D)
Move the cursor to the SYNC parameter.
Connect the coaxial cable for the external HD and
VD signal to the gen-lock input connector and the
VD input connector respectively.
Confirm that the INT parameter changed to EXT
(HA/) on the menu.
Move the cursor to the RGB SYNC parameter.
Select 4.0V or 0.3V according to the RGB monitor
input level.
7. Black Balance Setting (BLACK BAL)
In low light condition, correct setting of the black
balance is required for producing correct colors.
Once the black balance setting has set correctly,
the setting maintained in a memory.
This setting will not be lost even if the camera con­
trol unit Is turned off. However, for best results, it is
recomended that the black balance adjustment be
carried out the camera has not been used for a
long period of time.
The black balance control mode can be selected
between auto black balance control (ABC) on the
front panel and manual control (MANU) on this
menu.
7-1. Auto Black Balance Setting (BLACK BAL)
1. Move the cursor to the BLACK BAL parameter and
select ABC.
** SET UP **
CAMERA ID *OFF
FLD/FRM FLO
ELC •OFF
SHUTTER OFF .
GAIN
SYNC
BLACK BAL AUTO
[^EXT(H/V)
ABC
SCENE FILE •SCENEl
END
>
** SET UP **
CAMERA ID
FLD/FRM
EDC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
*OFF
FLD
*OFF
OFF
AUTO
INT
lABC
*SCENE1
6-5. External VD Mode (VD)
1, Move the cursor to the SYNC parameter and select
INT.
2
.
Connect the coaxial cable for the external VD sig­
nal to the VD input connector.
3. Confirm that the INT parameter changed to EXT
(VD) on the menu.
4. Move the cursor to the RGB SYNC parameter.
5. Select 4.0V or 0.3V according to the RGB monitor
input level.
r
* * SET UP **
CAMERA ID •OFF
FLO/FRH FLD
ELC •OFF
SHUTTER OFF
GAIN AUTO
SYNC r*EXtiVD)
BLACK BAL ABC
SCENE FILE *SCENE1
END
2. Attach the lens cap on the camera lens.
3. Move the cursor to END and press the PAGE but­
ton to close the SET UP menu.
4. Press the M (ABC) button on the front panel of the
camera control unit.
The auto black balance setting is performed.
5. When the auto black balance is completed, the
auto warning indicator goes off after blinking. If the
indicator is kept being lit, follow the setting proce­
dures above for auto black balance setting (ABC)
again.
7-2. Manual Black Balance Control Setting(MANU)
1. Move the cursor to the BLACK BAL parameter and
select MANU.
•• SET UP **
CAMERA ID •OFF
FLD/FRM FLD
ELC •OFF
SHUTTER OFF
GAIN AUTO
SYNC INT
BLACK BAL [iMANU
SCENE FILE •SCEN]
END
-
17
-