Panasonic PV-GS80 - Manual (Page 41)

Frame-by-frame playback Playback on TV
Playback mode
• Set to Tape Playback Mode.
1 During playback, move the joystick up to
select the [►/II] icon to pause playback.
2 Push the [—M/VOL+] lever.
Towards [Wj; reversed direction
• If you keep pushing the lever, then the images
will continuously be played back frame by
frame.
•The pause icon appears for an instant.
Continuous frame-by-frame playback will start
after the pause icon disappears.
I To return to normal playback
Move the joystick up to select the [►/!!] icon to
start playback.
Images recorded by this Camcorder can be
played back on a TV.
• Insert a recorded tape or card into this
Camcorder.
• Be sure that the power of the unit is turned off
before connecting it to a TV.
1 Connect the Camcorder and a TV.
• Connect the Camcorder and a TV by using
the AV cable
0
.
2 Turn on this Camcorder and set the mode
dial to the Tape Playback Mode (or Card
Playback Mode).
3 Select the input channel on the TV.
• If the images are not played back correctly on
the TV (e.g. they are displayed vertically),
perform the menu operations in accordance
with the aspect ratio of the TV monitor.
Set [SETUP] » [TV ASPECT] » [16:9] or
[4:3],
4 Move the joystick up to select the [►/! I]
icon to start playback.
• The image and audio are output on the TV.
5 Move the joystick down to select the [■]
icon to stop playback.
• Use the AC adaptor to free you from worrying
about the battery running down.
■ If the image or audio from this
Camcorder is not output on the TV
• Check that the plugs are inserted as far as they
go-
• Check the [12bit AUDIO] settings. (-JS-)
• Check the connected terminal.
• Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
41
LSQT1121