G to exit the menu screen, I to get back to the previous screen, I adjusting the brightness and coior ievei – Panasonic PV-GS80 User Manual

Page 24: Using the menu screen, I about the menu setting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5 Move the joystick right or press it to set the

selection.

Adjusting LCD monitor/vlewfinder

Before using

6 Move the joystick up or down in order to

select the item to be set.

7 Press the joystick to determine the setting.

g To exit the menu screen

Press the [MENU] button.

I To get back to the previous screen

Move the joystick left.

I About the menu setting

•The menu is not displayed while recording on a

tape or a card. Also, you cannot record on a

tape or a card while the menu is displayed.

I Adjusting the brightness and coior

ievei

1 Set [SETUP] » [LCD SET] or [EVF SET] »

[YES].

SETUP.if.^, ENTER

EKIT«)

2 Move the Joystick up or down in order to

select the item to be adjusted.

[LCD SET]

ijf. : Brightness of the LCD monitor

[EVF SET]

iBrightness of the viewfinder

3 Move the joystick left or right to move the

bar indication representing the brightness.

4 Press the [MENU] button or the joystick to

complete the settings.

• When the LCD monitor is rotated by 180°

towards the lens, the brightness of the LCD

monitor cannot be adjusted.

• To adjust the brightness of the viewfinder, close

the LCD monitor and extend the viewfinder to

activate it.

• These settings will not affect the images actually

recorded.

LSQT1121