Panasonic PV-GS80 - Manual (Page 40)

Playback mode
Playback mode
Playing back tape
• Set to Tape Playback Mode.
{An operation icon automaticaliy appears on
the LCD monitor.)
Playback/Pause
Rewind/Review playback (Reverts to
playback with the ►/!! icon.)
►►: Fast forward/Cue playback (Reverts to
playback with the ►/!! icon.)
■ : Stop
•The power will not turn off when the LCD
monitor and the viewfinder are closed and
refracted during Tape playback mode.
• During cue/review playback, fast-moving
images may show noise as a mosaic.
• Before and after cue/review playback, the
screen may become blue for a moment or
images may be disturbed.
I To adjust volume
Adjust the speaker volume for playback.
1 Move the [-H/VOL-i-] lever to adjust the
volume.
Towards [+]: increases the volume
Towards [-]: decreases the volume
(The nearer the bar is to [+], the higher the
volume.)
• When the adjustment is completed, the volume
indication will disappear.
• If you do not hear the sound, check the settings
of [SETUP] » [12bit AUDIO].
I Repeat playback
When the tape end is reached, the tape will be
rewound and played back again.
1 Set [ADVANCED] » [REPEAT PLAY] »
[ON].
• The [{J3i^] indication appears. (In order to
cancel the repeat playback mode, set
[REPEAT PLAY] » [OFF] or turn off the
power.)
I Settings on the audio
• If you cannot listen to the desired audio when
playing back a tape, check the settings in
[SETUP] »[12bit AUDIO],
• When you record the audio in [12bit] and set
[SETUP] » [12bit AUDIO] » [MIX], the audio
will be played back in stereo sound regardless
of the settings in [AUDIO OUT],
40
LSQT1121