Connections and dialing mode setting – Panasonic KX-F590 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation and Preparation

Connections and dialing mode setting

1. Ensure that the dialing mode selector is set to TONE.

2. Lift the handset or press the SP-PHONE button, then listen for the dial tone.

3. Dial a familiar number.

4. If the call is successful, the unit is connected to a tone exchange. Leave the selector set to TONE.

5. If the call is not successful, the unit is connected to a pulse exchange. Switch the selector to PULSE.

Notes:
•

We recommend the use of an exclusive power outlet to avoid interference from other equipment.

• When you operate this product, the socket outlet should be near the product and be easily accessible.

• The unit will not function during a power failure.
• You can connect an external telephone/answering machine to the unit after peeling off the tape on the

external telephone jack (EXT). When you use with an answering machine, see page 18.

•

For additional equipment protection, we recommend the use of a surge protector. The following type is

available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE
MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).