Setting the date and time, Setting your logo, Setting the date and time setting your logo – Panasonic KX-F590 User Manual
Page 30: Cd® qd
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Settings
Setting the date and time
The internal clock of the unit will print the date and time, on the top line of alt fax messages you transmit,
and on the fax communication reports such as the journal report and the transmission report.
( )|ШШ
Press MENU.
1.SYSTEM SET UP
CD® QD
Press #01.
SET DATE & TIME
0
START/Щт)
О
Press START/SET.
01/01/94 12:00A
ффф
(pep©
©Cp©
g
:)©
ce
)
Enter the current
month/day/year/hour/
minute by selecting each
2 digits. Then press *
for AM or press # for PM.
Example:
Aug. 10
1995, 3:00 PM
Press 08 10 95 03 00,
then press # to select
PM.
Press START/SET to
store the setting.
Press MENU to end the
program.
Notes:
• When you make a mistake while programming, press the STOP button, then make the correction.
• The accuracy of the clock will be approximately ± 45 seconds a month at room temperature.
Setting your logo
The logo is used to identify fax messages that are being transmitted by your unit. It may consist of
alpha-numeric letters and symbols. Usually the logo is a company, division or personal name in an
abbreviated form.
( )|ШШ
Press MENU.
1.SYSTEM SET UP
® ® CD
Press #02.
YOUR LOGO
О
START/ЩТ!
о
Press START/SET.
LOGO =
СрфСр
©©©
©фер
0
0
START/[
set
!
о
( )[ШШ
Enter your logo up to
30 characters by
following the instructions
on page 28.
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
•
When the first character is entered, the preset logo will be cleared.
30