Control panel, Sp-phone/voice stdby button – Panasonic KX-F590 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installation and Preparation

Control panel

button (pages 12, 17 and 34)

Used for speed dialing. Also used for the

electronic telephone directory.

@ MENU button

Used to start and exit various programming.

@ RECEIVE MODE

button (page 11)

Used to select the desired receiving mode.

Used to adjust scanning line density.

@ Direct call station keys (pages 12, 17 and 29)

Used for one-touch dialing. Also used as

character keys when logo and station names
are programmed.

(§) HELP

button (page 3)

Used to print an easy guide of operations.

@ LOWER key (pages 12, 17 and 32)

Used to access lower stations (6 to 10) for

one-touch dialing.

TONE

button (page 49)

Used to temporarily change the dialing mode

from pulse to tone during a dialing operation.

Dial keypad
Used for dialing operation and parameter
setting. Also used as character keys.

SP-PHONE/VOICE STDBY button

(pages 12 and 48)
Used for on-hook dialing and voice contact

features.

(Jl)

MUTE button (page 13)

Used for voice muting.

REDIAL/PAUSE button (pages 13 and 49)

Used to redial the last dialed number. Also
used to insert a pause into a phone number.

@ FLASH button (page 49)

Used as a hook button. Also used to access

some features of your host exchange.

@ STOP button (page 16)

Used to stop fax communication.

@ COPY button (page 25)

Used to start copying.

® START/SET button

Used to start fax communication. Also used to

store parameters during programming.

Used to adjust the volume level of the ringer,

speaker and handset.