Initiating voice contact, Receiving a request for voice contact, Voice contact – Panasonic KX-F590 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced Instructions
Voice Contact
You can have a voice conversation on the same call after fax transmission or reception is completed.
This saves the extra expense and time of making a subsequent telephone call to discuss the information
sent over the fax.
Important:
•
This feature works only when the other party’s unit is equipped with the voice contact/call reservation
feature.
Initiating voice contact
Press
SP-PHONE/VOICE STDBY while
transmitting or receiving documents.
VOICE STANDBY
—Your unit wiil call the other party with a
distinctive ring.
^ When the other party answers, the unit will
emit a distinctive ring. While ringing, press
SP-PHONE/VOICE STDBY again or lift the
handset to start speaking.
Notes:
• If you initiate voice contact while transmitting
documents, you can speak after alt the
documents have been transmitted.
• If you initiate voice contact white receiving
documents, you can speak after the current page
of the documents is received.
• You can initiate the voice contact by iifting the
handset during transmission or reception.
• if the other party does not answer, the line will be
disconnected automatically.
Receiving a request for voice contact
If the other party initiates voice contact, your unit will emit a distinctive ring after the transmission or
reception is completed.
When a distinctive ring is heard, press
SP-PHONE/VOICE STDBY or lift the handset, then start speaking.
Note:
• If you do not answer within 10 seconds of hearing the distinctive ring, the tine will be disconnected
automatically.
48