Delayed transmission, Cpcp – Panasonic KX-F590 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advanced Instructions
Delayed Transmission
Using a built-in clock, the unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours given by some telephone companies.
The delayed transmission can be reserved to take place up to 24 hours.
Insert the documents
FACE DOWN.
Press
MENU.
1.SYSTEM SET UP
Press #25.
DELAYED XMT
Press
START/SET.
OCDd)
cpcp®
CD®®
MODE=OFF
[ A T
Press A or T to select
"ON”.
MODE=ON
A T
Enter the transmission
start time.
Example: 11:00PM
Press 1100, then press #
to select PM.
—To select AM, press
Press
START/SET to
store the setting.
Press
MENU to end the
program.
—When the
programmed time has
come, the unit will
automatically start
transmission.
Notes:
•
If there is no answer or the line is busy, the unit will automatically redial the number (see item 7 on
page 61).
•
You can receive, transmit and copy documents while the delayed transmission is set. To copy or transmit
documents, remove documents from the tray and replace them when you have finished.
• If the programmed start time has passed during a power failure, delayed transmission wiil be attempted
soon after the power is restored.
•
When polling transmission feature (see page 35) is set to ON, this feature is not available.
—If this feature is not
required, select “OFF’
Press
START/SET.
NO. =
CpCpCD
CD CD CD
®(i)CD
®cS)®
Enter the phone number
using one-touch dialing,
speed dialing or a full
number.
—You can use the
electronic telephone
directory (see
page 34).
Press
START/SET to
store the number.
TIME=12;00AM
O
36