Operation – Panasonic WVCF20 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Angular field of view and focus
By connecting the Video Output Jack (Diameter is
2.5mm) to the video input on a video monitor, local
adjustment of angular field of vie\w and/or focus is
available \while observing the picture.
Note : Be sure to use this jack only the purpose for
adjustment of the angular field of view or
focus.
Do not use this jack for anyother purpose.
Other wise the noise on the screen wilt be
obtained.
OPERATION
By using the optional Camera Drive Unit, WV-PS11A,
and Color Monitor, WV*CM1000, the sound from the
camera can be monitored.
Set the Michrophone On/Off Switch (4) to the ON
position.
On
B B B y
OFF
MIC
Note : When the distance between the camera
and speaker is too close, howling or
feedback may occur.
In this case, turn the Audio Control (5) to
counterclockwise (MIN direction) until the
howling stops.
AUDIO
MIN O MAX
-8-