Panasonic TX-2103MA User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection of AC Power Supply
If the AC power voltage is within the range of 90-264 V, it can be used regardless of the differ
ence of line frequency (50 Hz or 60 Hz). There is no voltage select switch between the AC 100 V
system and the AC 200 V system.
Precautions;_______________________________________________________________
o In order to use the display unit safely, use a power cable that is properly grounded,
o The attached power cable is accepted by both the American UL standard and the the Ca
nadian CSA standard.
o For safety, use the power cable which conforms with the safety standard of each country.
U.S.A.................................................... UL
Italy ........................................................... CENELEC
Canada ................................................ CSA
Germany .............................................. VDE
Japan ................................................... Electric Appliance Control Act
France .................................................. NF
O AC PLUG CONNECTION (For U.K.)
Connect your AC plug with Mains lead of the set as follows.
IMPORTANT
The wires in this Mains lead are coloured in accordance with the following cord:
Blue; Neutral
Brown; Live
Green and Yellow:
Ground
As the colours of the wires in the Mains lead of this apparatus may not correspond with the
coloured marking identifying the terminals in your plug proceed as follows.
•
The wire which is coloured Green and Yellow must be connected to the terminal in the
plug which is marked by the letter E or By the Safety ground symbol ^ or coloured
Green or Green and Yellow.
•
The wire which is coloured blue must be connected the terminal which is marked with the
letter N or coloured black.
•
The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
AC PLUG
Ground terminal
t
(Brown)
(Blue)
AC Power Cord
(Green and Yellow)
Warning: Please don’t connect Brown wire and Blue wire to the ground Terminal.
- 3 -