Programming the universal remote control, Procedure, Cable converter box – Panasonic PT-51G40 User Manual

Page 40: Preferred procedure, Alternate procedure

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Programming The Universal Remote Control

VCR

Preferred Procedure

Code Known

Programming Universal Remote Using
Infra-Red Access Codes for VCRs

■ Determine brand □! VCR

- Identify code(s) associated with the brand in the

infra-red code index for VCRs (located in this
manual)

Procedure

Place the Remote TVA/CR/CABLE switch into the

VCR position (Center)

vch

cable

□nn

Press and hold VCR POWER button down on
Universal Remote

vcr

power

3 Enter two digit code using keyboard "0 through 9"

buttons Release VCR Powerbutton TheUniversal

Remote is now programmed

NOTE Some brands have multiple codes Repeat

procedure using each code listed until VCR

responds correctly

Alternate Procedure

Code Unknown

Programming Universal Remote Using the

“Sequence Method” for VCRs

■ Confirm VCR IS plugged in and operating properly,

then turn OFF

Procedure

Place the Remote TVA/CR/CABLE switch into the

VCR position (Center)

vcb

cable

Press and hold the VCR POWER button down on
Universal Remote

vcr

power

Cable Converter Box

Preferred Procedure

Code Known

Programming Universal Remote Using Infra-
Red Access Codes for Cable Television
Converter Boxes

■ Determine brand of Cable Television Converter box
> Identify code(s) associated with the brand in the

infra-red code index for Cable Television Converter

boxes (located in this manual)

Procedure

Place the Remote TV/VCR/CABLE switch into the

CABLE position (Right)

vch

hle

ПШ]

Press and hold the CABLE POWER button down on

Universal Remote

□

Enter two digit code using keyboard "0 through Э"

buttons Release CABLE Powerbutton TheUniversal

Remote is now programmed Use Ihe Remote

CHANNEL UP/DOWN buttons Гог selecting Cable

Converter Box channels.

NOTE: Some brands have multiple codes Repeat

procedure using each code listed until Cable

Television Converter box responds correctly

Alternate Procedure - Code Unknown

Programming Universal Remote Using the
“Sequence Method” for Cable Television
Converter Boxes

■ Confirm Cable Television Converter box is plugged in

and operating properly, then turn OFF

Procedure

Place the Remote TV/VCR/CABLE switch into the

CABLE position (Right)

vch

ble

Press and hold the CABLE POWER button down on

Universal Remote

power

Press VOL RIGHT button repeatedly Check for the

VCR to turn ON after each press When the VCR

turns ON, release VCR Power button The proper
infra-red code has now been accessed

Press VOL RIGHT button repeatedly Check for the
Cable Television Converter box to turn ON after each
press When the Cable Television Converter box turns
ON, release Cable Powerbutton The proper infra-red
code has now been accessed

NOTE.

■ It may take several attempts before the correct code is

found

■ The VOL LEFT button can be used to return to a code

that was accidently passed by

■ Some Remote Controls may have unique operating

functions for some buttons For Example The POWER

button may only turn the Cable Television Converter box
OFF as opposed to both ON and OFF It will then be
necessary to modify the procedure Turn the Cable

Television Converter box ON and repeatedly press the

VOL RIGHT button until the Cable Television Converter

box turns OFF

NOTE: When operating equipment (VCR or Cable Converter box) with the Universal Remote Control, the

TV/VCR/CABLE Switch should be set to the same position where the Access Code was first programmed for the

equipment Otherwise, leave the switch in the TV position

- 4 0 -

NOTE-

may take several attempts before the correct code

IS found

The VOL LEFT button can be used to return to a

code that was accidently passed by

Some Remote Controls may have unique operating

functions for some buttons For Example The

POWER button may only turn the VCR OFF as
opposed to both ON and OFF It will then be
necessary to modify the procedure Turn the VCR

ON and repeatedly press the VOL RIGHT button
until the VCR turns OFF