Antenna mode (tv or cable), Antenna (tv or cable tuning mode), Helpful hints – Panasonic PT-51G40 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Antenna Mode (TV or Cable)
Displays and Exits Menus
^ACTION
Located On Remote Control
Selects or Adjusts
FealurBsWIiEn
Menu
IS
Displayed
Antenna (TV or Cable Tuning Mode)
IMPORTANT NOTE: The proper input mode must be
selected to match the type of signal at the antenna
input (Cable or TV).
■ CABLE IS used when the Receiver is connected to a
Cable TV System and you are not using a cable
company converter box (Channels 01-125)
- TV IS used when the Receiver is not connected to a
Cable TV System, for example, when using a VHP/
UHF antenna (Channels 02-6Э)
NOTE Some Cable TV Systems encode (scramble)
program material on specific channels A cable
company supplied decoder is required to
reproduce an acceptable picture Certain Cable
TV Systems offset some channels to reduce
interference It will be necessary to use the
cable company supplied converter to receive
these specific channels
1
Press the ACTION button to display the Mam Menu
2
Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Sel Lfp Icon
3
Press the ACTION button to display the Set Up
Menu
SET UP
SETUP
SETTIME
a 23 AM
JETD«iL
SUN
ANTENNA 1
1 CABLE
AUTO PROGRAM
NO
MANUAL PROGRAM
NO
4
Press the CH UP or DOWN button to highlight
“ANTENNA"
5
Press the VOL LEFT or RIGHT button to select TV
□r CABLE
6
Press the ACTION button twice to exit
Helpful Hints:
The Antenna Mode Selection also affects the PIP frame
channels
- 3 7 -