Panasonic PT-51G40 - Manual (Page 15)

TVA/ideo Button
— Press the TVA/IDEO button
[□ select desired input for Mam Picture or PIP frame
(when the PIP IS displayed)
TV/VIDEO
Signal connected to
REARVIDEO/AUDIO INPUT Z JACKS
REAR VIDEO/AUDIO _____
INPUT 1 JACKS
TV or CABLE------------
TV/VIDEO
Signal connected to
Recall Button
- Press the RECALL button to
review
> Audio Mode status
- CH number or Video Input selected
■ Sleep Timer status
- Clock time
■ Channel Caption (Station Identifier)
RECALL
a
1 STEREO 1 XYYZ_QHI13
SAP ¡VIDEO ll
MONO
©2Э 1:D0
R-Tune (Rapid Tune) Button
— Press the
R-TUNE (RAPID TUNE) button to instantly switch
between the last two channels selected (without any On
Screen display being activated)
H-TUNE
CHANNEL Now
BEING VIEWED
Ö
Prass Button
Prass Button Again
CHANNEL TUNED
IMMEDIATELY BEFORE
Multi Button
The MULTI button can be programmed to operate up
to 6 Remote function buttons at the same time.
For Example: TV Power/On, VCR Power/On (selected
brands) can be operated at the same time with one press
of the MULTI button
Procedure
1 First program the Remote for the selected VCR
Infra-red access code Confirm that the Remote
Control IS compatible with the equipment
2 Face the Remote Control transmitter away from all
equipment remote sensors
3 Press and hold Remote TV Power button, then
press and hold the MULTI button down simulta­
neously (All previous commands are erased )
fTV)^
MULTI
POWER
maximum
PRESS SIMULTANEOUSLY
□f 6 Function buttons on the 4 Press a
Remote
Each button you press is equal to one function If six
Remote button functions are entered, all will register
in the MULTI button memory in the sequence
entered When less than six Remote button
functions are entered, press the MULTI button to
end the program mode (Waiting more than 30
seconds without pressing another button will also
end the program mode )
The following is an example of Remote functions
that can be programmed mlo the MULTI button.
- TV Power - For turning TV ON and OFF
- VCR Power - For turning VCR ON and OFF
(selected brands after programming it's Infra-red
access code, if necessary)
Both can be turned ON or OFF with one press of the
MULTI button
(TV)
POWER VCR POWER
MULTI
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously
Now you can enter from one to six different Remote
functions (TV)
POWER
MULTI
PRESS SIMULTANEOUSLY
NOTE:
You can also program the MULTI button to perform
most individual Remote Control button functions
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc ) cannot be programmed Only those
buttons which perform a function when initially
pressed (Power On/Off, Mute, Direct Channel Entry,
etc ) can be programmed
- 1 5 -