System examples – Yamaha MC2410M User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYSTEM EXAMPLES
Communication
between
the
monitor
operator
and
the
house soundman is provided in the following manner: the
monitor operator plugs his TB microphone into the TB input
connector on the front panel. The signal from this input is
sent out via the TB OUT connector, to the RETURN input of
the main house console (e.g., a Yamaha MC3204II). If the
echo return input is not available, an input channel could be
used to receive the monitor TB. This signal would not be
assigned to any output on the house console, merely CUE'd
for headphone monitoring by the engineer. The house
soundman sends his TB signal via his foldback output to an
input channel on the mixer. The monitor engineer would
then cue the input channel for monitoring in his head
phones.
(ALTERNATIVE DIRECT CONNECTION)
TALKBACK-
PHONES—
-AUX OUT
-RETURN
RETURN-
TB OUT-
PHONES
TALK
BACK
P.A. MIXING CONSOLE
(e.g. YAMAHA MC3204II)
MC3210M, MC2410M
14