Panasonic OMNIVISION PV-8453 - Manual (Page 25)

Important for Program Index Search:
Timer recordings must be
recorded back to back in order for
them to be piaced on the Program
Index list. If a timer recording Is
followed by a function, such as
REW or PLAY, the data is lost.
Program Index Search
(For timer recordings only)
This feature allows you to choose a timer recorded program from a
Program Index list and then start a search for that program.
Once the tape is ejected or normal recording is started,
all program Index data are deleted.
1
Press INDEX
to display the “SELECT
SEARCH MODE" screen.
Press
AV to select “PROGRAM
INDEX SEARCH,"
and then press ►
to display the “PROGRAM INDEX”
screen.
Press
AT to select the desired
recorded program,
and then
press
► to start the fonward or
rewind search.
• When the designated program is reached,
the VCR goes into Playback mode.
SELECT SEARCH MODE
INDEX SEARCH
PROGRAM INDEX
DATE START CATEGORY
1/ 4 12:30P MOVIE NBC
1/ 4 B:OOP COMEDY CBC
1/ 7 3:OOP MUSIC NBC
SELECT:A t KEY
SEARCH:► KEY
END ; INDEX KEY
Index Scan
(For normal and/or timer recordings)
This feature allows you to scan (forward or reverse)
each recording for 10 seconds in Playback mode.
Press INDEX
to display the
“SELECT SEARCH MODE” screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
Press
AT to select “INDEX
SEARCH,"
and then press ►
to display the “INDEX” screen.
Press REW or FF
to begin the scan.
• As each index mark is reached,
a short playback will be performed
after which FF or REW resumes.
Press PLAY
to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
Start hers
SELECT SEARCH MODE
PROGRAM INDEX SEARCH
SELECT
SET
END