Panasonic OMNIVISION PV-8453 - Manual (Page 19)

POWER Multi Function Display
Cancel a Timer Recording:
(Recording is in progress)
Press POWER and then STOP within 10 seconds to
cancel the timer recording.
• The TIMER indicator goes out in the Multi Function Display.
Replace Program Contents:
(Recording is not in progress)
1 Press PROG to display all currently
set programs.
2 Press AT and ► to select and
set a program number.
(See page 18.)
3 Press
AT
and to select and
set replacement timer information.
4 Press PROG twice to exit this mode.
P OT
a —
START STOPCHSPD
2 e 10:OOP12:OOP12S SP
3 10 8:OOP 9:OOP 10 SP
4 SU 9:00P10:0OPL LP
SELECT 1-8;*
w
KEY
ENTER KEY
END:PR0G KEY
b M ik I/ start stop
8 SAT 10:OOP12:OOP 12
T№XT\
CATEGORY:SPORTS
ABC
SP
SELECT:* Y KEY
SET KEY
Review or Clear Program Contents:
(Recording is not in progress)
1 Press PROG to display all
currently set programs.
2 Press AT to select a program
number.
3 Press ADD/DLT if you want
to clear the program.
4 Press PROG to exit this mode.
P DT START STOP CH SPD
a 8 10;OOP12:OOP125 SP
3 10 0;OOP 9:OOP 10 SP
4 SU 9:OOP10:OOP L UP
CANCEL:ADDiDLT KEY
SELECT 1-8:* T KEY
ENTER :► KEY
END :PROG KEY
P OT START STOP CH SPD
8 10:00P12:00P12S
10 8:00P 9:00P 10
SU 9:OOP10:OOP L
SELECT 1 -B:* T KEY
ENTER KEY
END :PROG KEY
Timer Recording Using VCR Buttons
(Make sure a cassette tape is not inserted in the VCR.)
1 Hold down STOP/EJECT and press REW to enter the Program mode.
2 Press FF or REC/TIME repeatedly or hold down to make selections.
3 Press PLAY to set the item and move on.
• To make corrections, repeatedly press PLAY to move the cursor to the right,
or REW to move to the left to the incorrect entry and make the correction.
4 Press STOP/EJECT and REW together to display program contents
after all items have been entered.
• You cannot clear programs with the VCR buttons.
5 Hold down STOP/EJECT and press REW, (release REW first, and
then release STOP/EJECT) to exit this mode.
6
Insert a cassette with record tab and press POWER off to set the timer.
19