Panasonic OMNIVISION PV-8453 - Manual (Page 22)

Special VCR Features (continued)
*lmportant: If the remote control POWER, ACTION, PROG, CHA/V, INDEX or ADD/DLT button does
not work when pressed, press the VCR button on the remote and try the button again.
I^^Check list before you begin.
n All connections are made.
(See pages 6-9.)
□ VCR is plugged in.
Q TV is turned on and set to the VCR
channel (CH 3 or 4),
VCR Lock Feature
2
3
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME
on the VCR
without a cassette inserted
for 7
seconds
during Power On mode.
> “NO CASSETTE PLEASE iNSERT A
CASSETTE" is displayed when REC^IME
is pressed. Please disregard this warning
and continue to hold down REC/TIME
for 7 seconds.
VCR LOCK ACTIVATED
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the VCR for
7 seconds again while in Stop mode.
VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
VCR LOCK OFF
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1
Press ACTION*
to display the menu.
2
Press
AT to select “SET UP
VCR,”
and then press
► to
display the “SET UP VCR" screen.
3
Press
AT to select “BEEPER,”
and then press
► to select “CN”
or “CFF.”
4
Press ACTION twice
to exit this
screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
Ш ЮМА/ LANGUE: ENGLISH
SELECT:* ▼ KEY
SET :► KEY
END :ACT I ON KEY
SET UP VCR
REPEAT PLAY : OFF
: ON
NOISY CH BLUE BACK: ON
SELECT;* ▼ KEY
SET : KEY
END :ACT I ON KEY
22